CPExpert WLM report

MANAGEMENT SUMMARY OF FINDINGS

Management Summary of CPExpert's findings

This Management Summary provides a quick overview of the results of CPExpert's analysis of your MXG performance data.

You can suppress the Management Summary by specifying %LET MGMTOVER=N; in USOURCE(WLMGUIDE).

Not all of the areas that CPExpert can analyze were implemented during this execution of CPExpert.  The following analysis
areas were suppressed, based on guidance in the USOURCE(WLMGUIDE) module:


Thank you for using CPExpert!

DETAILED RESULTS FROM ANALYSIS

DETAILED RESULTS FROM ANALYSIS:

Introduction


This report consists of several parts:

- This Introduction and some pages of general information.

- A listing of the service policy which CPExpert extracted from the
  SMF Type 72 records. If the service policy was changed, CPExpert
  will list the new service policy and show the date/time the new
  policy was activated.  This information is listed only if %LET
  &CHKPLCY=Y or %LET &CHKGOAL=Y were specified in USOURCE(WLMGUIDE).

- Service Policy Findings (if any).  The Service Policy Findings are
  rules in the WLM001 to WLM050 range.  These findings help identify
  problems or potential problems with the Workload Manager service
  definition.  This analysis is done when %LET CHKGOAL = Y; is
  specified in USOURCE(WLMGUIDE).

  It is important to realize that these findings normally identify
  a POTENTIAL problem.  Your systems programming staff must decide
  whether the findings (and their associated recommendations) make
  sense in your environment.  For example, your systems programming
  staff might have deliberately selected certain parameter values.
  The values might be appropriate for your installation and your
  management objectives, even though CPExpert might produce a rule
  indicating that there is a potential problem with the parameter.

- General System Findings (if any).  The General System Findings
  are rules in the WLM050 to WLM099 range.  These findings identify
  problems or potential problems with your overall system.  For
  example, many of the rules deal with problems with the paging
  subsystem.  These findings are made if CPExpert detected that some
  some general system problem existed in the z/OS environment.

- Findings related to performance problems with service class periods.
  This analysis is done when %LET CHKGOAL = Y; is specified in
  USOURCE(WLMGUIDE).

  - WLM100(series) relate to service class performance goal findings.
    These findings are produced when CPExpert detects that a service
    class period did not achieve its performance goal.

  - WLM200(series) relate to service class period delays because of
    CPU-related problems.

  - WLM300(series) relate to service class period performance problems
    because of I/O delays.

  - WLM400(series) relate to swap-in and target MPL delays to service
    class periods, and relate to enqueue problems (if %LET CHKENQ=Y;
    was specified in USOURCE(WLMGUIDE).

  - WLM500(series) relate to IFA/zAAP findings.  This analysis is done
    when %LET CHKZAAP = Y; is specified in USOURCE(WLMGUIDE).

  - WLM550(series) relate to zIIP findings.  This analysis is done
    when %LET CHKZIIP = Y; is specified in USOURCE(WLMGUIDE).

  - WLM600(series) relate to Cross System Coupling Facility (XCF) and
    Integrated Coupling Facility (ICF) findings.  This analysis is
    done when %LET CHKXCF = Y; is specified in USOURCE(WLMGUIDE).
    These findings are made when CPExpert detects problems or
    potential problems with XCF performance.  Some findings in the
    WLM6nn(series) also could be made if CPExpert's PR/SM analysis

Introduction

    detects problems with Internal Coupling Facility LPAR
    specifications.

  - WLM690(series) relate to zEDC Data Compression Feature/Card findings.
    This analysis is done when %LET CHKZEDC = Y; is specified in
    USOURCE(WLMGUIDE).  These findings are made when CPExpert detects
    problems or potential problems with zEDC data-compression performance.

  - WLM700(series) relate to System Logger findings.  This analysis is
    done when %LET CHKLOGER = Y; is specified in USOURCE(WLMGUIDE),
    and if you provide SMF(Type 88) records to CPExpert.  These
    findings made when CPExpert detects potential problems with
    System Logger performance.

  - WLM800(series) relate to PR/SM findings.  This analysis is done
    when %LET CHKPRSM = Y; is specified in USOURCE(WLMGUIDE).  These
    findings are made when CPExpert detects potential problems with
    PR/SM performance or LPAR specifications.

  - WLM900-WLM912 relate to z/OS HIS data (CPU Measurement Facility),
    when %LET CHKCPUMF = Y; is specified in USOURCE(WLMGUIDE).  These
    findings are made when CPExpert detects potential degradation with
    z/OS LPAR processor cycles and cache resources.

  - Detailed reports.  The detailed reports provide information about
    your system (e.g., CPU activity or applications executing in the
    SYSOTHER service class).  These reports are intended to provide
    you with information to support the findings produced by
    CPExpert's analysis of system performance under the z/OS
    Workload Manager.

When findings are produced by the WLM Component, please refer to
the detailed description of the rule contained in the
WLM Component Manual.  The User Manual will describe why the
finding was made, an assessment of the overall performance
impact of the finding, and discuss alternatives which may be
implemented to solve the problem.

Thank you for using CPExpert!  We hope that it helps you analyze
your z/OS system performance.

Please contact CPExpert Support if you have any questions or if
you have suggestions for product improvement.

Analysis not performed

CPExpert did not produce some information that is typically
produced because either information was not available or you
did not use guidance variables to tell CPExpert that the
analysis and reporting should be performed.

The following analysis was not performed:


GUIDANCE
VARIABLE           ANALYSIS AREA

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 3 - PART 1

The following Guidance was provided to the WLM Component during this execution of CPExpert.
You can suppress this listing by specifying LISTGDE=N in USOURCE(WLMGUIDE).

CHKCPUMF  = Y              * ANALYZE CPU MEASUREMENT FACILITY DATA?
CHKCPUQ   = Y              * ANALYZE QUEUING FOR PROCESSOR ACCESS
CHKGOAL   = Y              * ANALYZE SERVICE CLASS PERIOD MISSED GOAL?
CHKENQ    = Y              * ANALYZE RESOURCE CONTENTION PROBLEMS?
CHKINIT   = Y              * ANALYZE WLM-MANAGED INITIATOR PROBLEMS?
CHKIOP    = Y              * ANALYZE IOP/SAP IMBALANCE PROBLEMS?
CHKLOGER  = Y              * ANALYZE SYSTEM LOGGER PROBLEMS?
CHKPAGE   = Y              * ANALYZE PAGING SUBSYSTEM PROBLEMS?
CHKPLCY   = Y              * ANALYZE SERVICE POLICY PROBLEMS?
CHKPRSM   = Y              * ANALYZE PR/SM PERFORMANCE PROBLEMS?
CHKRPT    = N              * ANALYZE REPORT CLASS MISSED GOAL?
CHKSMF    = Y              * ANALYZE SMF PROBLEMS?
CHKSYS    = Y              * ANALYZE SYSTEM AND SYSSTC EXCESSIVE CPU?
CHKXCF    = Y              * ANALYZE COUPLING FACILITY PROBLEMS?
CHKZAAP   = N              * ANALYZE ZAAP PROBLEMS?
CHKZIIP   = Y              * ANALYZE ZIIP PROBLEMS?
CHKZEDC   = Y              * ANALYZE ZEDC PERFORMANCE?
CHKVLF    = Y              * ANALYZE VLF PROBLEMS?
WLMDATES  = 01JAN1991      * START DATE FOR DATA ANALYSIS
WLMTIMES  = 10:00:00       * START TIME FOR DATA ANALYSIS
WLMDATEE  = 31DEC2199      * END DATE FOR DATA ANALYSIS
WLMTIMEE  = 11:59:59       * END TIME FOR DATA ANALYSIS
WLMDAT2S  = 0              * DEFAULT SECOND SELECTION DATE - START
WLMTIM2S  = 0              * DEFAULT SECOND SELECTION TIME - START
WLMDAT2E  = 0              * DEFAULT SECOND SELECTION DATE - END
WLMTIM2E  = 0              * DEFAULT SECOND SELECTION TIME - END
SHIFT     = N              * START AND END TIMES DO NOT APPLY TO SHIFT
N_PLEX    = N              * VARIABLE TO CONTROL ANALYSIS OF SYSPLEX
SYSPLEX   = PLEX1          * SPECIFY SYSPLEX TO PROCESS (*ALL = ALL)
CECSER    = *ALL           * SPECIFY CECSER TO PROCESS (*ALL = ALL)
SYSTEM    = *ALL           * SPECIFY SYSTEM TO PROCESS (*ALL = ALL)
SYSTEMn   = system         * PROCESS SYSTEMn (n = 1-9)
SELECTSW  = N              * DO NOT SELECT SPECIFIC SERVICE CLASSES
SELECT1   = TSO            * EXAMPLE: ANALYZE TSO SERVICE CLASS
PERIOD1   = 1              * EXAMPLE: ANALYZE PRD 1 OF TSO SERV CLASS
EXCLUDSW  = N              * DO NOT EXCLUDE SPECIFIC SERVICE CLASSES
EXCLUDE1  = BATCHLOW       * EXAMPLE: EXCLUDE BATCHLOW SERVICE CLASS
GOAL_IMP  = 6              * GOAL IMPORTANCE LEVEL FOR ANALYZING GOALS
LPAREQCF  = N              * IS LPAR NAME EQUAL TO CF NAME?
ZONEADJ   = N              * ADJUST TIME ZONE FOR GMT OFFSET?
CPUQUEUE  = 60             * QUEUE THRESHOLD TO SELECT CPU QUEUING DATA
REPORT    = STANDARD       * REPORT USING STANDARD OR HISTORY DATA
VERBOSE   = V              * RESULTS: VERBOSE/CONCISE/SUMMARY/OVERVIEW
LISTGDE   = Y              * LIST OR SUPPRESS GUIDANCE SPECIFICATIONS
LISTENQS  = Y              * CONTROLS LISTING OF ENQUEUE PROMOTION RPT
LISTIOP   = N              * LIST DATA FOR IOPS?
LISTMISS  = Y              * LIST SERV CLASS MISSING GOA
LISTPOL   = Y              * CONTROLS WHETHER TO LIST THE WLM POLICY
LSTINTRO  = Y              * PRINT INTRODUCTION?
LSTNOANL  = Y              * PRINT ANALYSIS NOT DONE?
LSTPRSMC  = Y              * LIST SUMMARY PRSM FOR CENTRAL PROCESSORS
LSTPRSMS  = Y              * LIST SUMMARY PRSM FOR SPECIAL PROCESSORS
LISTRPT   = Y              * LIST REPORT CLASSES WITH POLICY (Y/N)
LSTSTATS  = Y              * PRINT WLM COMPONENT RUN STATISTICS?

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 4 - PART 1

MGMTOVER  = N              * PRODUCE MANAGEMENT OVERVIEW OF ANALYSIS?
CPUDATA   = Y              * CPU REPORT, SERVICE CLASS MISSED GOAL
IFADATA   = N              * CONTROLS zAAP DELAY REPORTS IN PART 6
ZIPDATA   = Y              * CONTROLS zIIP DELAY REPORTS IN PART 6
ZEDCDATA  = ALL            * CONTROLS zEDC ANALYSIS REPORTS (Y/N/ALL)
ZEDCSUMR  = STEP           * CONTROLS zEDC USER REPORT SUMMARIZATION
ZEDCSUMG  = SYSTEM         * CONTROLS zEDC CHART GENERATION/SUMMARY
ZEDCGH    =                * CONTROLS zEDC CHART HEIGHT (BLANK/DEFAULT)
ZEDCGW    =                * CONTROLS zEDC CHART WIDTH  (BLANK/DEFAULT)
ZEDCIMAP  = ON             * CONTROLS zEDC CHART IMAGEMAP (ON/OFF)
MPLDATA   = N              * MPL REPORT, SERVICE CLASS MISSED GOAL
POLORDER  = ALPHA          * ORDER TO LIST POLICY (ALPHA OR IMPORT)
SASODS    = Y              * CONTROLS WHETHER SAS ODS IS USED
PATH      = c:\Users\erics\Documents\CPExpert\V291ReportSamples
FRAME     = WLMFRAME       * GENERIC ODS FRAME NAME
CONTENTS  = WLMCONT        * GENERIC ODS CONTENTS NAME
BODY      = WLMBODY        * GENERIC ODS BODY NAME
LINKPDF   =                * INSERT HTML LINKS TO PDF FILES
STYLE     = CPEXPERT       * ODS HTML STYLE OPTION
PDFODS    = N              * CONTROLS WHETHER SAS ODS PDF IS USED
PDFFILE   = filename       * PATH FOR SAS ODS PDF OUTPUT
URL       = N              * CONTROLS .HTM IN SAS ODS FRAME OUTPUT
EMAIL     = N              * SEND EMAIL ALERT FOR HIGH IMPACT FINDINGS?
WLMnnn    = OFF            * EXAMPLE: TURN OFF WLMnnn RULE
AVGRESP   = ELAPSED        * COMPUTE RESPONSE TIME USING ELAPSED TIME
HIGHCPU   = 0.75%          * PERCENT TO USE IN REPORTING HIGH CPU USERS
HIGHIFA   = 0.75           * PERCENT TO USE IN REPORTING HIGH zAAP USER
INACTIVE  = Y              * SWITCH: INACTIVE SERVICE CLASS PERIODS
MAXDUR    =                * MAXIMUM DUR VALUE FOR TSO PERIOD 1
MAXRESP   = 0:05:00        * MAXIMUM RESPONSE PERFORMANCE GOAL
MAXVEL    = 20             * MAXIMUM EXECUTION VELOCITY FOR BATCH
MINEXETM  = 30             * CONTROLS MINIMUM EXECTM FOR RULE WLM082
MINTRANS  = 10             * IGNORE INTERVALS WITH LESS THAN 10 TRANS.
OKPAGEIN  = 5              * ACCEPTABLE PAGE-IN DELAY (MS)
PERFINDX  = 1.0            * PERFORMANCE INDEX-MISSED GOALS EXCEED THIS
PHASE     = EXECUTION      * ANALYZE WORK MANAGER EXECUTION PHASE
PCTIFA30  = 25             * PERCENT zAAP USE OF CPU (WLM530)
PCTIFA35  = 25             * PERCENT zAAP USE OF CPU (WLM535)
PCTIOPRT  = 25             * IOP ACTIVTY PCT OF AVERAGE => EXCESSIVE
PCTRDYQC  = 25             * PERCENT TIME ON LCP READY QUEUE - CENTRAL
PCTRDYQS  = 25             * PERCENT TIME ON LCP READY QUEUE - SPECIAL
PCTSHRCF  = 50             * PERCENT SHARE OF RESOURCES TO ICF (POOL 2)
PCTSTC    = 15             * MAXIMUM ACCEPTABLE SYSSTC CPU PERCENT
PCTSYS    = 5              * MAXIMUM ACCEPTABLE SYSTEM CPU PERCENT
POLCHG    = 3              * MAXIMUM SERVICE POLICY CHANGES PER DAY
SWAPDW    = 1.0            * UNACCEPTABLE SWAP RATE,DETECTED WAIT
SWAPTO    = 0.1            * UNACCEPTABLE SWAP RATE,TERMINAL OUTPUT WT
SYSTEMS   = 1              * COUNT OF SYSTEMS BEING ANALYZED
MINSAMP   = 100            * IGNORE SRV CLASS IF LESS THAN 100 SAMPLES
WLMSIG    = 1000%          * SIGNIFICANT PERCENT DEGRADATION
WLMSJOB   = 50             * MAX OPERATOR START JOBS (WLM-INITIATOR)
COUPLE    = N              * SWITCH-CONTROLS COUPLING FACILITY ANALYSIS
ASYNCSRV  = 5000           * ACCEPTABLE SERVICE TIME, ASYNCHRONOUS REQ
EXCLASSW  = N              * SWITCH-EXCLUDE TRANSPORT CLASS(ES)
EXCLASS1  =                * EXCLUDE TRANSPORT CLASS 1

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 5 - PART 1

EXCLASS2  =                * EXCLUDE TRANSPORT CLASS 2
EXCLASS3  =                * EXCLUDE TRANSPORT CLASS 3
EXCLASS4  =                * EXCLUDE TRANSPORT CLASS 4
EXCLASS5  =                * EXCLUDE TRANSPORT CLASS 5
EXCLASS6  =                * EXCLUDE TRANSPORT CLASS 6
EXCLASS7  =                * EXCLUDE TRANSPORT CLASS 7
EXCLASS8  =                * EXCLUDE TRANSPORT CLASS 8
EXCLASS9  =                * EXCLUDE TRANSPORT CLASS 9
FALSECNT  = 50%            * MAXIMUM PERCENT FALSE LOCK CONTENTION
LOCKCONT  = 200%           * MAXIMUM PERCENT LOCK CONTENTION
LOCKSRV   = 50             * ACCEPTABLE SERVICE TIME, LOCK REQUESTS
PCTSML    = 90%            * ACCEPTABLE % SMALL MESSAGES
PCTBIG    = 1%             * ACCEPTABLE % BIG MESSAGES
PCTREJ    = 0%             * % MESSAGES REJ, NO BUFFER SPACE, OUTBOUND
PCTREJIN  = 0.1%           * % MESSAGES REJ, NO BUFFER SPACE, INBOUND
SYNCSRV   = 150            * ACCEPTABLE SERVICE TIME, SYNCHRONOUS REQ
SYNCREQS  = 10             * MINIMUM NUMBER OF SYNCHRONOUS REQUESTS
SYNCCHG   = 1000%          * ACCEPTABLE PCT CHANGED (SYNCH TO ASYNCH)
LGDSFULL  = 0              * ACCEPTABLE LOG STREAM STAGING DATA SET FULL
LGSHIFTS  = 1              * ACCEPTABLE NUMBER OF LOG STREAM DASD SHIFTS
PCTINST   = 0%             * PERCENT INTERIM STORAGE NOT EFFECTIVELY USED
PCTLOCST  = 0%             * PERCENT LOCAL STORAGE NOT EFFECTIVELY USED
STDSHIGH  = 0%             * STAGING DATA SET HIGH THRESHOLD HIT
STFULL90  = 0              * ACCEPTABLE STRUCTURE 90% FULL
STRC2     = 0              * ACCEPTABLE TIMES STRUCTURE HIGHOFFLOAD HIT
STRC3     = 0              * ACCEPTABLE TIMES STRUCTURE CRITICAL SPACE HIT
STRFULL   = 0              * ACCEPTABLE LOG STREAM STRUCTURE FULL
WLM011GD  = 0              * GUIDANCE FOR RULE WLM011
WLM037GD  = 0              * GUIDANCE FOR RULE WLM037
WLM040GD  = 20             * GUIDANCE FOR RULE WLM040
WLM045GD  = 65534          * GUIDANCE FOR RULE WLM045
WLM052GD  = 0.4            * GUIDANCE FOR RULE WLM052
WLM062GD  = 80             * GUIDANCE FOR RULE WLM062
WLM063GD  = 100            * GUIDANCE FOR RULE WLM063
WLM064GD  = 95             * GUIDANCE FOR RULE WLM064
WLM075G1  = 1              * GUIDANCE FOR RULE WLM075
WLM075G2  = SERVICE        * GUIDANCE FOR RULE WLM075
WLM076G1  = 0.001          * GUIDANCE FOR RULE WLM076
WLM076G2  = SERVICE        * GUIDANCE FOR RULE WLM076
WLM092GD  = 1              * GUIDANCE FOR RULE WLM092
WLM094GD  = 5              * GUIDANCE FOR RULE WLM094
WLM095G1  = 0.75           * GUIDANCE FOR RULE WLM095
WLM095G2  = 4              * GUIDANCE FOR RULE WLM095
WLM095G3  = 0.1            * GUIDANCE FOR RULE WLM095
WLM096GD  = 0.25           * GUIDANCE FOR RULE WLM096
WLM253GD  = 0.1            * GUIDANCE FOR RULE WLM253
WLM254GD  = 0.25           * GUIDANCE FOR RULE WLM254
WLM260GD  = 0.6            * GUIDANCE FOR RULE WLM260
WLM262GD  = 0.6            * GUIDANCE FOR RULE WLM262
WLM270GD  = 0.05           * GUIDANCE FOR RULE WLM270
WLM271GD  = 0.5            * GUIDANCE FOR RULE WLM271
WLM315GD  = 0.1            * GUIDANCE FOR RULE WLM315
WLM316GD  = 0              * GUIDANCE FOR RULE WLM316
WLM318GD  = 0.001          * GUIDANCE FOR RULE WLM318
WLM450GD  = 1              * GUIDANCE FOR RULE WLM450

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 6 - PART 1

WLM455GD  = 10             * GUIDANCE FOR RULE WLM455
WLM456GD  = 1              * GUIDANCE FOR RULE WLM456
WLM460G1  = 0.050          * GUIDANCE FOR RULE WLM460
WLM460G2  = 0.010          * GUIDANCE FOR RULE WLM460
WLM460G3  = 0.001          * GUIDANCE FOR RULE WLM460
WLM461G1  = 0.100          * GUIDANCE FOR RULE WLM461
WLM461G2  = 0.050          * GUIDANCE FOR RULE WLM461
WLM461G3  = 0.002          * GUIDANCE FOR RULE WLM461
WLM462G1  = 0.500          * GUIDANCE FOR RULE WLM462
WLM462G2  = 0.100          * GUIDANCE FOR RULE WLM462
WLM462G3  = 0.050          * GUIDANCE FOR RULE WLM462
WLM464G1  = 60.000         * GUIDANCE FOR RULE WLM464
WLM464G2  = 0.500          * GUIDANCE FOR RULE WLM464
WLM464G3  = 0.200          * GUIDANCE FOR RULE WLM464
WLM464G4  = 7              * GUIDANCE FOR RULE WLM464
WLM466G1  = 60.000         * GUIDANCE FOR RULE WLM466
WLM466G2  = 5.000          * GUIDANCE FOR RULE WLM466
WLM466G3  = 1.000          * GUIDANCE FOR RULE WLM466
WLM466G4  = 7              * GUIDANCE FOR RULE WLM466
WLM468G1  = 300.00         * GUIDANCE FOR RULE WLM468
WLM468G2  = 60.000         * GUIDANCE FOR RULE WLM468
WLM468G3  = 10.000         * GUIDANCE FOR RULE WLM468
WLM468G4  = 7              * GUIDANCE FOR RULE WLM468
WLM535G1  = 0.01           * GUIDANCE FOR RULE WLM535
WLM542GD  = 25             * GUIDANCE FOR RULE WLM542
WLM550GD  = 25             * GUIDANCE FOR RULE WLM550
WLM551GD  = 25             * GUIDANCE FOR RULE WLM551
WLM570GD  = 10             * GUIDANCE FOR RULE WLM570
WLM575GD  = 10             * GUIDANCE FOR RULE WLM575
WLM575G1  = 0.01           * GUIDANCE FOR RULE WLM575
WLM611GD  = 1              * GUIDANCE FOR RULE WLM611
WLM612GD  = .002           * GUIDANCE FOR RULE WLM612
WLM622GD  = 0.7            * GUIDANCE FOR RULE WLM622
WLM623GD  = 0.7            * GUIDANCE FOR RULE WLM623
WLM651GD  = .5             * GUIDANCE FOR RULE WLM651
WLM652GD  = .5             * GUIDANCE FOR RULE WLM652
WLM675GD  = 10             * GUIDANCE FOR RULE WLM675
WLM676GD  = 1              * GUIDANCE FOR RULE WLM676
WLM677GD  = 0              * GUIDANCE FOR RULE WLM677
WLM690GD  = 0.7            * GUIDANCE FOR RULE WLM690
WLM720GD  = 0              * GUIDANCE FOR RULE WLM720
WLM723GD  = 0              * GUIDANCE FOR RULE WLM723
WLM724GD  = 0              * GUIDANCE FOR RULE WLM724
WLM725GD  = 0.25           * GUIDANCE FOR RULE WLM725
WLM726GD  = 0.75           * GUIDANCE FOR RULE WLM726
WLM730GD  = 1              * GUIDANCE FOR RULE WLM730
WLM735GD  = 255            * GUIDANCE FOR RULE WLM735
WLM740GD  = 1              * GUIDANCE FOR RULE WLM740
WLM750GD  = 0.25           * GUIDANCE FOR RULE WLM750
WLM755GD  = 10             * GUIDANCE FOR RULE WLM755
WLM760GD  = 0.5            * GUIDANCE FOR RULE WLM760
WLM763GD  = 26624          * GUIDANCE FOR RULE WLM763
WLM764GD  = 2              * GUIDANCE FOR RULE WLM764
WLM765GD  = 0.75           * GUIDANCE FOR RULE WLM765
WLM840GD  = 1              * GUIDANCE FOR RULE WLM840

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 7 - PART 1

WLM841GD  = 1              * GUIDANCE FOR RULE WLM841
WLM871GD  = 2              * GUIDANCE FOR RULE WLM871
WLM876GD  = 2              * GUIDANCE FOR RULE WLM876
WLM877GD  = 0.9            * GUIDANCE FOR RULE WLM877
WLM883GD  = 0.9            * GUIDANCE FOR RULE WLM883
WLM886GD  = 0.9            * GUIDANCE FOR RULE WLM886
WLM893GD  = 0.1            * GUIDANCE FOR RULE WLM893
WLM894GD  = 58             * GUIDANCE FOR RULE WLM894
WLM900G1  = 1              * GUIDANCE FOR RULE WLM900
WLM900G2  = 0.25           * GUIDANCE FOR RULE WLM900
WLM901G1  = 1              * GUIDANCE FOR RULE WLM901
WLM901G2  = 0.25           * GUIDANCE FOR RULE WLM901
WLM902G1  = .1             * GUIDANCE FOR RULE WLM902
WLM902G2  = 0.25           * GUIDANCE FOR RULE WLM902
WLM903G1  = .1             * GUIDANCE FOR RULE WLM903
WLM903G2  = 0.25           * GUIDANCE FOR RULE WLM903
WLM904G1  = .1             * GUIDANCE FOR RULE WLM904
WLM904G2  = 0.25           * GUIDANCE FOR RULE WLM904
WLM905G1  = .1             * GUIDANCE FOR RULE WLM905
WLM905G2  = 0.25           * GUIDANCE FOR RULE WLM905
WLM910G1  = 1              * GUIDANCE FOR RULE WLM910
WLM910G2  = 0.25           * GUIDANCE FOR RULE WLM910
WLM911G1  = .1             * GUIDANCE FOR RULE WLM911
WLM911G2  = 0.25           * GUIDANCE FOR RULE WLM911
WLM912G1  = .1             * GUIDANCE FOR RULE WLM912
WLM912G2  = 0.25           * GUIDANCE FOR RULE WLM912
WLM930GD  = 0.05           * GUIDANCE FOR RULE WLM930
WLM931GD  = 0.05           * GUIDANCE FOR RULE WLM931
WLM932GD  = 0.05           * GUIDANCE FOR RULE WLM932
WLM950GD  = 1              * GUIDANCE FOR RULE WLM950
LOGGUIDE  = N              * GUIDANCE IS PROVIDED, INDIVIDUAL LOG STREAMS
STRGUIDE  = N              * GUIDANCE IS PROVIDED FOR INDIVIDUAL STRUCTURES
WLM735GD  = 255            * GUIDANCE FOR RULE WLM735
WLM750GD  = 0.25           * GUIDANCE FOR RULE WLM750
WLM755GD  = 10             * GUIDANCE FOR RULE WLM755
EXCLUDEQ  = N              * EXCLUDE JOB NAMES FROM ENQUEUE ANLAYSIS
PERFIMAP  = ON             * CONTROLS PERF CHART IMAGEMAP (ON/OFF)
PERFGH    =                * CONTROLS PERF CHART HEIGHT (BLANK/DEFAULT)
PERFGW    =                * CONTROLS PERF CHART WIDTH  (BLANK/DEFAULT)
WLMG4     = Y              * PRODUCE CPXWLMG4 CHART? (Y/N)
WLMG5     = Y              * PRODUCE CPXWLMG5 CHART? (Y/N)
WLMG5CL   = VLIBG VLIG GREEN BILG YELLOW ORANGE RED ;
WLMG5CL   = VLIBG VLIG GREEN BILG YELLOW ORANGE RED
WLMG5RL   = 0.5 0.9 1.1 3.0 5.0 10.0 ;
WLMG5RL   = 0.5 0.9 1.1 3.0* CPXWLMG5 RANK LIST
RPTTOPN   = Y              * REPORT -TOP N- CPU USERS IN SUBSYS
SUBGROUP  = *ALL ;
JOB1      =  ;
JOB2      =  ;
JOB3      =  ;
JOB4      =  ;
JOB5      =  ;
JOB6      =  ;
JOB7      =  ;
JOB8      =  ;

Guidance variables

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 8 - PART 1

JOB9      =  ;
TOPNJOBS  = 25 ;

Summary of analysis performed

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 9 - PART 1


       SUMMARY OF WLM COMPONENT OPERATION, EXECUTED ON Tue, May 26, 2020




TOTAL RECORDS READ FROM MXG PDBLIB.TYPE72GO INPUT FILE:              8,734

RECORDS SELECTED BASED UPON SYSTEM/START/END CRITERIA:               8,734

REPORT CLASS RECORDS REJECTED:                                       6,927

SERVICE CLASS PERIOD RECORDS SELECTED (SELECT LOGIC):                1,807

SERVICE/REPORT CLASS RECORDS EXCLUDED (EXCLUDE LOGIC):                   0

RECORDS REJECTED (SYSTEM SERVICE CLASS, DISC. GOAL, SERVER, ETC.):     847

TOTAL RECORDS ANALYZED FOR POOR PERFORMANCE:                           960

RECORDS WITH PERFORMANCE WORSE THAN GOAL:                               10


TOTAL RULE RECORDS WRITTEN BY THE WLM COMPONENT:                       689

Service policy in effect during analysis

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 10 - PART 2

SYSPLEX: PLEX1      SERVICE POLICY: SMPPRD1
POLICY EFFECTIVE:   02DEC2019:18:06:51
OPERATING SYSTEM:   z/OS Version 2, Release 3
MXG VERSION NUMBER: 37.37

SERVICE COEFFICIENTS:  CPU=1.0  SRB=1.0  MSO=0.0  IOC=0.1

SERVICE    CLASS   PERIOD                   GOAL           GOAL        CPU       CPU   CPU/STORAGE   I/O
 CLASS    PERIOD  DURATION  GOAL TYPE    IMPORTANCE GOAL PERCENT       MIN       MAX   PROTECTION  PRIORITY

AUTOMATE     1              REPORT CLASS     3       30%
BT11         1              REPORT CLASS     3       30%
BT11DDF      1       1500   REPORT CLASS     2       40%
BT11DDF      2              REPORT CLASS     5       10%
BT1G         1              REPORT CLASS     3       30%
BT51         1              REPORT CLASS     3       30%
BT51DDF      1       1500   REPORT CLASS     2       40%
BT51DDF      2              REPORT CLASS     5       10%
BT5G         1              REPORT CLASS     3       30%
BT71         1              REPORT CLASS     3       30%
BT71DDF      1       1500   REPORT CLASS     2       40%
BT71DDF      2              REPORT CLASS     5       10%
BT7G         1              REPORT CLASS     3       30%
BTDG         1              REPORT CLASS     3       30%
CASBCM       1              REPORT CLASS     2     0.500
CASRECLE     1              REPORT CLASS     2     0.500
CICSRESP     1              AVG RESPONSE     2     0.500
CICSTR       1              REPORT CLASS     3       30%
CICSTXRC     1              REPORT CLASS     2     0.500
DBBAT        1              REPORT CLASS     4       50%
DBQ1DDF      1       1500   REPORT CLASS     2       40%
DBQ1DDF      2              REPORT CLASS     5       10%
DBQ2DDF      1       1500   REPORT CLASS     2       40%
DBQ2DDF      2              REPORT CLASS     5       10%
DBT6         1              REPORT CLASS     3       30%
DBT6DDF      1       1500   REPORT CLASS     2       40%
DBT6DDF      2              REPORT CLASS     5       10%
DDFTST       1       1500   EX. VELOCITY     2       40%
DDFTST       2              EX. VELOCITY     5       10%
DSQ0         1              REPORT CLASS     3       30%
DSQ0DDF      1       1500   REPORT CLASS     2       40%
DSQ0DDF      2              REPORT CLASS     5       10%
DSQ1         1              REPORT CLASS     3       30%
DSQ1DDF      1       1500   REPORT CLASS     2       40%
DSQ1DDF      2              REPORT CLASS     5       10%
DST0         1              REPORT CLASS     3       30%
DST0DDF      1       1500   REPORT CLASS     2       40%
DST0DDF      2              REPORT CLASS     5       10%
DST1         1              REPORT CLASS     3       30%
DST1DDF      1       1500   REPORT CLASS     2       40%
DST1DDF      2              REPORT CLASS     5       10%
EJES         1              REPORT CLASS     1       50%
FINBAT       1              REPORT CLASS     4       50%
GDPS         1              REPORT CLASS     0
ISPWSTC      1              REPORT CLASS     3       30%
JBATHI       1              REPORT CLASS     4       40%
JES2         1              REPORT CLASS     0
MISCDDF      1       1500   REPORT CLASS     2       40%
MISCDDF      2              REPORT CLASS     5       10%

Service policy in effect during analysis

MISCSTC      1              REPORT CLASS     3       30%
MISCTST      1   50000000   REPORT CLASS     5       20%
MISCTST      2              REPORT CLASS     6
MONITORS     1              REPORT CLASS     0

Service policy in effect during analysis

WORKLOAD MANAGER ANALYSIS, Mon, May 18, 2020 - SYSTEM: *ALL
Analyzed by Version 29.1.0 of CPExpert(tm)
(C) Copyright 2020, Computer Management Sciences, Inc.
PAGE: 11 - PART 2

SERVICE CLASS PERIOD GOAL GOAL CPU CPU CPU/STORAGE I/O
CLASS PERIOD DURATION GOAL TYPE IMPORTANCE GOAL PERCENT MIN MAX PROTECTION PRIORITY

MQ 1 REPORT CLASS 0
MTVBAT 1 REPORT CLASS 4 50%
MTVD010 1 REPORT CLASS 2 0.500
MTVD402 1 REPORT CLASS 2 0.500
MTVDSLQ 1 REPORT CLASS 2 0.500
NETWORK 1 REPORT CLASS 0
OMVSRC 1 REPORT CLASS 3 30%
ONLMED 1 EX. VELOCITY 2 50%
ONLPRD 1 EX. VELOCITY 2 60%
ONLTST 1 EX. VELOCITY *** 3(0) 30%
OPSYS 1 REPORT CLASS 0
PHARMACY 1 REPORT CLASS 2 0.500
POWEREX 1 REPORT CLASS 6
POWEREXG 1 DISCRETIONARY*** 6(0)
PRDBATHI 1 EX. VELOCITY 3 40%
PRDBATMD 1 EX. VELOCITY 4 50%
QMTVCICS 1 REPORT CLASS 3 30%
QMTVDB 1 REPORT CLASS 3 30%
RDZ 1 REPORT CLASS 3 30%
ROCKETSW 1 REPORT CLASS 3 30%
SECURITY 1 REPORT CLASS 3 30%
STCHI 1 EX. VELOCITY 1 50%
STCMD 1 EX. VELOCITY *** 3(2) 30%
STGMGMT 1 REPORT CLASS 3 30%
STORGBAT 1 REPORT CLASS 4 50%
SYSOTHER 1 DEFAULT CLASS 6
SYSSTC 1 SYSTEM TASKS 0
SYSTEM 1 SYSTEM TASKS 0
TCASCICS 1 REPORT CLASS 3 30%
TECHBAT 1 REPORT CLASS 4 50%
TESTCICS 1 REPORT CLASS 3 30%
TESTIDMS 1 REPORT CLASS 3 30%
TMTVCICS 1 REPORT CLASS 3 30%
TSO 1 500 % RESPONSE 2 0.400 80
TSO 2 2000 % RESPONSE 3 00:01.0 80
TSO 3 EX. VELOCITY 4 10%
TSTBATHI 1 EX. VELOCITY 4 40%
TSTBATMD 1 50000000 EX. VELOCITY 5 20%
TSTBATMD 2 DISCRETIONARY 6
UNKNOWN 1 REPORT CLASS 3 30%
WODM 1 REPORT CLASS 3 30%
ZOSCONN 1 REPORT CLASS 3 30%

The above may not be the complete definition of Service Policy SMPPRD1.
If no address spaces were active in a service class, SMF Type 72 information
may not be available for the service class. Consequently, CPExpert would
be unable to determine the service class parameters.

Please note that service classes which have '***' by their goal type
are uniquely handled by the Workload Manager. The resources assigned
to these service classes are dependent upon whether the transactions
served are meeting their service goals. The Goal and Goal Importance
specified for these SERVER classes normally are used by the Workload
Manager only during address space start-up. The highest importance of
any served service class is shown in parentheses after the importance
of the server.

Service policy in effect during analysis

The above policy is listed alphabetically.  You can have the policy
ordered by service class period importance by changing the POLORDER
guidance variable.

PR/SM LPAR definitions

        WORKLOAD MANAGER ANALYSIS, Mon, May 18, 2020 - CECSER: 31A8
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 12 - PART 2

                           PR/SM LPAR SPECIFICATIONS


CECSER                                31A8
CPU TYPE & MODEL                      3906-712
SOFTWARE SERVICE UNITS PER SECOND    48079.63
NUMBER OF CENTRAL PROCESSORS            12
NUMBER OF ICF PROCESSORS                 4
NUMBER OF IFL PROCESSORS                 6
NUMBER OF ZAAP PROCESSORS                0
NUMBER OF ZIIP PROCESSORS                6
NUMBER OF LPARS                          9
SHARED CENTRAL PROCESSORS                9
DEDICATED ICF PROCESSORS                 2
SHARED ZIIP PROCESSORS                   6
TOTAL LOGICAL CENTRAL PROCESSORS         9
TOTAL LOGICAL ZIIP PROCESSORS            2
LOGICAL TO PHYSICAL RATIO (CENTRAL)   1.0:1
LOGICAL TO PHYSICAL RATIO (zIIP)      0.3:1
PR/SM TIME SLICE: CENTRAL PROCESSORS   25.0 (COMPUTED BY PR/SM)
PR/SM TIME SLICE: SPECIAL PROCESSORS   25.0 (COMPUTED BY PR/SM)

                                          ---------------------CENTRAL PROCESSORS--------------------   --------------HIPERDISPATCH INFORMATION----------------
             LPAR   ---CPU POOL ---       # PHYSICAL CPU   LOGICAL PROCESSORS    PHYSICAL PROCESSOR              -LOGICAL PROCESSOR DISTIRBUTION-  CP SHARE FOR
LPAR NAME   CAPPED  WEIGHT    SHARE       FOR LPAR SHARE    ASSIGNED TO LPAR    PER LOGICAL PROCESSOR   STATUS   HIGH POL   MEDIUM POL    LOW POL   MEDIUM POL
SYST                  250     100.0            9.00                  9                   1.00           ACTIVE       8           1           0          1.00

TOTAL                 250     100.0            9.00                  9                                               8           1           0          1.00

PR/SM LPAR definitions

        WORKLOAD MANAGER ANALYSIS, Mon, May 18, 2020 - CECSER: 31A8
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 13 - PART 2

                                        ---------------------SPECIAL PROCESSORS---------------------
             LPAR   ---ICF POOL----     # PHYSICAL ICF   LOGICAL PROCESSORS    PHYSICAL PROCESSOR
LPAR NAME   CAPPED  WEIGHT    SHARE     FOR LPAR SHARE    ASSIGNED TO LPAR    PER LOGICAL PROCESSOR
CFP3                 N/A       (LPAR HAS  2 DEDICATED PROCESSORS)





                                        ---------------------SPECIAL PROCESSORS---------------------
             LPAR   ---ZIIP POOL---     # PHYSICAL ZIIP  LOGICAL PROCESSORS    PHYSICAL PROCESSOR
LPAR NAME   CAPPED  WEIGHT    SHARE     FOR LPAR SHARE    ASSIGNED TO LPAR    PER LOGICAL PROCESSOR
SYST                 100      100.0           6.00                  2                 3.00

TOTAL                100      100.0           6.00                  2

Service policy findings

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 14 - PART 3



RULE WLM002: CONFLICT EXISTS BETWEEN SERVICE CLASS AND REPORT CLASS

   The Service Policy being analyzed (Policy SMPPRD1) contains a Report
   Class that conflicts with a Service Class.  This conflict could cause
   double accounting of system resources in reports that key off the
   class name.  This finding has no known effect on performance, but could
   have a HIGH IMPACT on accounting, billing, or capacity planning.  The
   following Report Class conflicts with a Service Class of the same name.

            REPORT CLASS
              PRDBATMD
              SYSSTC
              SYSTEM
              TSO
              TSTBATHI


RULE WLM005: VELOCITY GOAL MAY BE TOO HIGH FOR BATCH SERVICE CLASS

   CPExpert noticed that a service class period had an execution velocity
   goal greater than 20.  The service class had the word "batch" in its
   Service Class Description.  Consequently, CPExpert assumes that the
   service class consists of batch jobs.  Specifying a relatively high
   velocity goal for batch jobs might cause performance problems unless
   the batch jobs are well-behaved.  Under some circumstances, this
   velocity goal could result in 20% of the system being used by batch
   workload.  Please refer to Rule WLM005 in the WLM Component User Manual
   for a discussion of this issue.

                                       VELOCITY
            SERVICE CLASS    PERIOD      GOAL       DESCRIPTION
            PRDBATHI            1         40        Critical Path Prod Batch
            PRDBATMD            1         50        Prod Batch Normal
            TSTBATHI            1         40        High Priority Test Batch

Service policy findings

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 15 - PART 3


RULE WLM011: THE SERVICE DEFINITION DOES NOT DESCRIBE ALL WORKLOAD

   CPExpert detected that some workload executed in the SYSOTHER service
   class.  The SYSOTHER service class is the default service class.  It
   is a good policy to explicitly classify all workload, so you can be
   sure that you have properly assigned both performance goals and goal
   importance to the workload.  CPExpert will produce a report at the end
   of this run to identify the work units assigned to the SYSOTHER service
   class.
   WARNING: If the work defaulting to SYSOTHER is DDF enclaves, there will
            be no entries in the Type 30 records.  If CPExpert does not
            produce a report showing the work units assigned to SYSOTHER,
            you should check for DDF work that was not classified.


RULE WLM025: THE SERVICE CLASS PERIOD MAY BE UNNECESSARY

   A service class period was inactive for over 75% of the RMF measurement
   intervals being analyzed (inactive means that less than 100 Using and
   Delay samples were collected by the SRM for the service class period
   during the RMF interval). Since the service class period was mostly
   inactive, you should re-evaluate whether this service class period is
   necessary.  Defining unnecessary service class periods (1) causes more
   overhead by the Workload Manager and (2) might cause the Workload
   Manager to be less responsive in managing system resources to meet your
   performance goals.  Please refer to Rule WLM025 in the WLM Component
   User Manual for a discussion of the reasons for this recommendation.
   This finding applies to the below service class periods.

            SERVICE CLASS    PERIOD
            ONLPRD              1
            PRDBATHI            1

Service policy findings

        WORKLOAD MANAGER ANALYSIS, Sun, May 17, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 16 - PART 3


RULE WLM026: HIGHEST IMPORTANCE SERVICE CLASS PERIOD HAD FEW SAMPLES

   STCHI (Period 1): This service class period had few Using or Delay
   samples for over 75% of the RMF measurement intervals being analyzed
   (less than 100 Using and Delay samples were collected by the SRM for the
   service class period during the RMF interval).  However, the execution
   velocity performance goal for the service class period was given the
   highest goal importance.  CPExpert cannot determine the type of work
   actually assigned to the service class period.  If the work assigned is
   started tasks, perhaps the started tasks can be assigned to the SYSSTC
   service class.  Please refer to Rule WLM026 in the WLM Component User
   Manual for a discussion of the reasons for this recommendation.


RULE WLM030: REPORT CLASS PERIOD IS HETEROGENEOUS

   At least one report class period was shown as "heterogeneous" by
   the SMF Type 72 information.  A report class period is referred to
   as "heterogeneous" when the report class period is associated to work
   units in multiple service classes.  Heterogeneous report classes
   can cause incorrect or misleading performance data, since the data
   collected is based on different goals, importance, or duration as
   specified for the multiple service class periods.

   REPORT                                    LAST SERVICE CLASS
   CLASS       PERIOD      SYSTEM         CONTRIBUTING INFORMATION
   AUTOMATE      1          TSYS                  SYSSTC
   BT11          1          TSYS                  SYSSTC
   BT51          1          TSYS                  SYSSTC
   BT71          1          TSYS                  SYSSTC
   DBT6          1          TSYS                  ONLTST
   DSQ0          1          TSYS                  ONLTST
   DSQ1          1          TSYS                  ONLTST
   DST0          1          TSYS                  ONLTST
   DST1          1          TSYS                  ONLTST
   JES2          1          TSYS                  SYSSTC
   MISCTST       1          TSYS                  TSTBATMD
   MONITORS      1          TSYS                  SYSSTC
   MQ            1          TSYS                  SYSSTC
   NETWORK       1          TSYS                  ONLTST
   QMTVDB        1          TSYS                  ONLTST
   SECURITY      1          TSYS                  SYSSTC
   STGMGMT       1          TSYS                  SYSSTC
   UNKNOWN       1          TSYS                  SYSSTC
   WODM          1          TSYS                  ONLTST
   DBBAT         1          TSYS                  PRDBATMD

Service policy findings

        WORKLOAD MANAGER ANALYSIS, Mon, May 18, 2020 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 17 - PART 3

   REPORT                                    LAST SERVICE CLASS
   CLASS       PERIOD      SYSTEM         CONTRIBUTING INFORMATION
   JBATHI        1          TSYS                  PRDBATHI
   TSO           1          TSYS                  SYSSTC
   PRDBATMD      1          TSYS                  PRDBATHI
   OPSYS         1          TSYS                  STCMD

System *ALL, General System Findings

        WORKLOAD MANAGER ANALYSIS, Fri, Jan 1, 1960 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 18 - PART 4



RULE WLM086: OPERATOR CHANGED SERVICE CLASS ASSOCIATED WITH A JOB

   Operator action changed the service class associated with a job.  If
   this situation occurs frequently, you should determine why operators
   are changing the service class associated with jobs.  You should also
   examine security rules (such as RACF rules) to make sure that security
   rules are properly enforced.  It is possible that syntax errors in the
   security rules could allow unauthorized modifications of the service
   class assigned to a job.

             JOB  SERVICE
   JOB NAME CLASS  CLASS    INITIATOR TIME        SYSTEM   OPERATOR ACTION
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC

System *ALL, General System Findings

        WORKLOAD MANAGER ANALYSIS, Fri, Jan 1, 1960 - SYSTEM: *ALL
                Analyzed by Version 29.1.0 of CPExpert(tm)
          (C) Copyright 2020, Computer Management Sciences, Inc.
                               PAGE: 19 - PART 4

             JOB  SERVICE
   JOB NAME CLASS  CLASS    INITIATOR TIME        SYSTEM   OPERATOR ACTION
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC
   TPMP01TE   S   SYSSTC    24MAR2020:20:19:11    TSYS     SRV CLS CHG DURING EXEC